www.pairuigroup.com page: 1/5 date: 12/15/2013 dc-dc converter sip-package DAE-1 series, 1watt, 1kvdc, unregulated features: 3 years warranty 1000vdc isolation voltage single, dual, isolated twin output models operating temperature range -40c to +85c model input voltage (vdc) output voltage (vdc) output current (ma) efficiency typ. min. max. dae1-0511 5(4.5~5.5) 5 20 200 80% dae1-0512 9 11 110 80% dae1-0513 12 8.3 83 80% dae1-0514 15 6.8 68 80% dae1-0515 24 4.2 42 80% dae1-0521 5 10 100 80% dae1-0522 9 5.5 55 80% dae1-0523 12 4 40 80% dae1-0524 15 3.3 33 80% dae1-0525 24 2.1 21 80% dae1-0501 5, 5 10 100 80% dae1-0502 9, 9 5.5 55 80% dae1-0503 12, 12 4 40 80% dae1-0504 15, 15 3.3 33 80% dae1-0505 24, 24 2.1 21 80% dae1-1211 12(10.8~13.2) 5 20 200 80% dae1-1212 9 11 110 80% dae1-1213 12 8.3 83 80% dae1-1214 15 6.8 68 80% dae1-1215 24 4.2 42 80% dae1-1221 5 10 100 80% dae1-1222 9 5.5 55 80% dae1-1223 12 4 40 80% dae1-1224 15 3.3 33 80% dae1-1225 24 2.1 21 80% dae1-1201 5, 5 10 100 80% dae1-1202 9, 9 5.5 55 80% dae1-1203 12, 12 4 40 80%
www.pairuigroup.com page: 2/5 date: 12/15/2013 dc-dc converter sip-package DAE-1 series, 1watt, 1kvdc, unregulated model input voltage (vdc) output voltage (vdc) output current (ma) efficiency typ. min. max. dae1-1204 12(10.8~13.2) 15, 15 3.3 33 80% dae1-1205 24, 24 2.1 21 80% dae1-2411 24(21.6~26.4) 5 20 200 80% dae1-2412 9 11 110 80% dae1-2413 12 8.3 83 80% dae1-2414 15 6.8 68 80% dae1-2415 24 4.2 42 80% dae1-2421 5 10 100 80% dae1-2422 9 5.5 55 80% dae1-2423 12 4 40 80% dae1-2424 15 3.3 33 80% dae1-2425 24 2.1 21 80% dae1-2401 5, 5 10 100 80% dae1-2402 9, 9 5.5 55 80% dae1-2403 12, 12 4 40 80% dae1-2404 15, 15 3.3 33 80% dae1-2405 24, 24 2.1 21 80% notes: other input and output models may available on reques t. electrical line regulation --- 1.2% load regulation 10% ~ 100% full load 15%max. ripple and noise --- 100mvp-p max. isolation voltage --- 1000vdc operating temperature range --- -40c to +85c mtbf --- 3.5x10 6 hrs notes: all the data in this article are under test with ta+25 c, humidity<75%, rated input and rated load mode.
www.pairuigroup.com page: 3/5 date: 12/15/2013 dc-dc converter sip-package DAE-1 series, 1watt, 1kvdc, unregulated mechanical single output connection pin # single dual isolated twin 1 +vin +vin +vin 2 gnd gnd gnd 4 -vo -vo -vo1 5 no pin com +vo1 6 +vo +vo -vo2 7 no pin no pin +vo2 dual output note: * unit is mm(inch). isolated twin output
www.pairuigroup.com page: 4/5 date: 12/15/2013 dc-dc converter sip-package DAE-1 series, 1watt, 1kvdc, unregulated temperature profile capacitive loads selection vin (vdc) cin (f) single output voltage (vdc) cout (f) dual output voltage (vdc) cout (f) 5 4.7 5 10 5 4.7 12 2.2 9 4.7 9 2.2 24 1 12 2.2 12 1 - - 15/24 1 15 4.7
www.pairuigroup.com page: 5/5 date: 12/15/2013 dc-dc converter sip-package DAE-1 series, 1watt, 1kvdc, unregulated notes recommended test and application circuit in order to ensure the efficiency and dependability of the mo dule, the minimum specified load must be less than 10% of rated load. if the output power is low, we recommend to add an e xternal 10% loading resistor in parallel. fuse: depends on the actual input current; tvs: depends on the actual input voltage; recommended capacitor: c1,c2,c5,c8, about 0.1uf; for c6,c 7,c9, please check the capacitive load; c3,c4: 2kv/1nf.
|